7
ENGLISH
TOPCOM Time Master 500
7 BATTERY INSTALLATION
When the display shows weak or irregular symbols, the battery needs to be
replaced.
If you are not confident with electronics, let change the battery by a
professional. Do not open the Chronometer yourself.
Remove all screws on the back cover of the chronometer with a small
screwdriver.
Remove and re-install a 3V (CR2032) battery with the positive (+) pole
facing up and replace the cover.
8 CE MARK
This product is in compliance with the essential requirements and other
relevant provisions of the directive 89/336/EEC. This is confirmed by the
CE-mark. The Declaration of conformity can be found on:
http://www.topcom.net/cedeclarations.php
Do not short-circuit batteries & dispose of in fire.
To Next Page
Loading...