Topcom Twintalker 6800 - Getting Started; Battery Installation

6 Topcom Twintalker 6800
Topcom Twintalker 6800
8 Getting started
8.1 Removing/Installing the Belt Clip
1. To remove the clip from the unit, push the belt
clip (B) towards the antenna, while pulling the
clip tab (A).
2. When re-installing the belt clip, a click indicates
the BeltClip is locked into position.
8.2 Battery Installation
1. Remove the belt clip (§ 8.1).
2. Loosen the screw in a counter clockwise
direction using a coin & open the battery
compartment. (C)
3. Install 4 ‘AAA’ alkaline or rechargeable batteries
following the polarity as shown.
4. Re-install the Battery Cover and Belt Clip (§
8.1).
+
-
1 x AAA
+
-
1 x AAA
+
-
1 x AAA
+
-
1 x AAA
A
B
C