Topcom ultra range series - De-registering a Handset; Using Multiple Handsets; Call Another Handset; Answering an Internal Call

27
8OWUD5DQJH
(1*/,6+
Hold down the paging key on the base station for more than
5 seconds until the message counter display on the base
station begins to flash with ‘ ’-‘ ’.
Registration mode on the base station is now activated for approx.
3 minutes. You must perform the following steps to register a
handset:
1. Press .
2. Press or repeatedly, select ‘5(*,675$7,21’.
3. Press to confirm.
4. Press or repeatedly, select ‘5(*,67(5’.
5. Press to confirm.
6. Enter the base station PIN code (system PIN, default 0000)
and press .
• The handset will now search for the base station and register
when it has found it. Following successful registration, the
display shows standby mode and the handset name and
number.
 'HUHJLVWHULQJDKDQGVHW
It is possible to de-register a handset from a base station. You
should do this, for example, if a handset is damaged and needs to
be replaced.
1. Press .
2. Press or repeatedly, select ‘5(*,675$7,21’.
3. Press to confirm.
4. Press or repeatedly, select ‘815(*,67(5’.
5. Press to confirm.
6. Enter the system PIN (base station PIN code) and press
.
7. Press or repeatedly to select the handset to be
de-registered and press to de-register.
 8VLQJPXOWLSOHKDQGVHWV
9.3.1 Call another handset
1. Press ,17 .
2. Press or repeatedly and select the handset you
want to dial.
•Select ‘$//+$1'6(76’ to call all handsets.
• Press to call the selected handset(s).
3. Press to hang up at the end of your call.
9.3.2
Answering an internal call
•‘&$//,1*)520+$1'6(7;’ appears in the display.
1. Press to answer the internal call.
25
1. Lift the handset off its base station (if auto talk is selected, see
section “4.24 Auto talk”).
• The handset number of the calling handset appear in the
display during the call.
2. Press to hang up at the end of your call.
9.3.3
Answering an external call during an internal call
If you receive an external call during an internal call, you will hear
the call waiting tone (double beep) in both handsets involved in the
internal call.
1. Press .
• The internal call is ended.
2. Press .
• You have now answered the external call.
22
23
17
4 15
17
4 15
17
17
17
4 15
17
4 15
17
17
4 15
17
These functions are only possible if more than one
handset is registered to the base station.
12
4 15
17
6
14
6
6
14