Topcon FC-6000 User Manual

6 FC-6000 Field Computer Operator’s Manual
Hand Strap
To attach the hand strap to the FC-6000, follow the images below.
You can attach it to the right or left side of the FC-6000:
Stylus Tether
1. Attach one end of the stylus tether to the stylus.
2. Push the free tether loop through one of the tether attachment
points located on the side of any of the four corners of the
FC-6000.
3. Insert the stylus with the attached tether through this loop and
tighten the loop.
4. Place the stylus into the stylus storage slot located on the
bottom of the FC-6000.
1
2
3

Topcon FC-6000 Specifications

General

Brand	Topcon
Model	FC-6000
Category	Desktop
Language	English