Chapter 2 Standard Features 17
Long-term Storage
To power o the FC-6000 for long-term storage, follow these steps:
1. Power o the FC-6000 as described in the previous section,
Short‑term Storage.
2. Press and hold the power button for 20 seconds. This
disconnects the batteries from the system.
3. Take out the removable battery and store it in a cool, dry
location.
4. When you are ready to power on the FC-6000, replace the
battery pack. Plug in the AC wall charger and connect it to the
FC-6000 BEFORE you power it on.
Ctrl‑Alt‑Delete Function
Press and hold down the windows key, then press the power key. A
list that includes the Task Manager is shown. Select Task Manager
to see which apps are running. Press More details at the bottom to
view Processes, Performance, and other items. This can be useful
for troubleshooting.
FC‑6000 is Locked Up
If the FC-6000 is completely stuck and won’t respond or you cannot
get to the Start menu, hold the power key down for five seconds
to see if that solves it. If that doesn’t work, hold it down for 10
seconds. This causes a hardware shut o. Press the power button
again to power it on.
If 10 seconds doesn’t work, hold the power button down for 20
seconds. Batteries are forced to electrically disconnect from the
FC-6000, causing a complete shut down. The FC-6000 cannot
be powered on again until it is plugged in with the AC wall charger.
Keep this in mind if you are in the field.
CAUTION: Holding the power button down for 20 seconds for a
forced disconnect is recommended only as a last resort. Forcing
the power o causes all unsaved data to be lost and corrupts active
data transfers to storage.
!
To Next Page
Loading...
Need help?
General
