Setup Guide TOPCON Apollo FSO - Single Liquid - Section Control
Doc. No. MAN0034 P 28 / 28
Revision. A Rev. Date 18/01/2022
3. Shut off section valve #1 via the control system and observe pressure.
If pressure has increased, rotate the dial on the valve anti-clockwise
until it drops to the level recorded in step 2.
If pressure has decreased, rotate the dial clockwise until it increases
to the level recorded in step 2.
4. Repeat step 3 for remaining valves one at a time. Sections with the same
number of outlets will usually end up with the same setting on the dial.
DIAL MARKER
To Previous Page
Loading...
