Topcon Slit Lamp SL-2G User Manual

Topcon Slit Lamp SL-2G

44 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

INSTRUCTION MANUAL

SLIT LAMP

SL-2G

Table of Contents

Questions and Answers:

J
Joshua SnyderAug 4, 2025
Why is the illumination lamp not working on my Topcon Microscope?
- K
  Kaitlyn RojasAug 4, 2025
  The illumination lamp might not be working on your Topcon Microscope due to several reasons. Check these possible causes: 1. The cable connection could be disconnected. Ensure the cable is properly connected. 2. The power switch and brightness control knob might be OFF. Turn ON the power switch and adjust the brightness control knob. 3. The AC adapter cable could be disconnected. Make sure the AC adapter cable is securely connected. 4. The power switch and brightness control knob might be set to the minimum position. Increase the power switch and brightness control knob. 5. The illumination lamp itself might be broken. If so, replace it with a new illumination lamp.
D
Dr. Jennifer Adams MDAug 13, 2025
What to do if the illumination field is not uniform on Topcon Microscope?
- D
  Donald MclaughlinAug 13, 2025
  If the illumination field on your Topcon Microscope is not uniform, has a shade, or appears dark, consider the following: * The illumination lamp may not be correctly fitted in place. Ensure the illumination lamp is properly fitted into the socket. * The aperture/slit length selector turret may not be clicked into place. Make sure the aperture/slit length selector turret is correctly clicked into place. * The filter selector lever might not be clicked into place. Ensure the filter selector lever is clicked into place.
J
Jesse FuentesAug 23, 2025
How to fix external fixation target if it doesn't work on Topcon Microscope?
- J
  Joseph TurnerAug 23, 2025
  If the external fixation target on your Topcon Microscope isn't working, the illumination unit cable might be off. Try inserting the cable to resolve the issue.

Topcon Slit Lamp SL-2G Specifications

General

Brand	Topcon
Model	Slit Lamp SL-2G
Category	Microscope
Language	English

Summary

INTRODUCTION

INTENDED USE AND INDICATIONS

Describes the purpose and application of the slit lamp.

GENERAL PRECAUTIONS

Lists conditions for installation and general handling.

CRITICAL SAFETY WARNINGS

Highlights critical safety warnings for users.

CAUTIONS FOR USE

DISPOSAL AND STORAGE GUIDELINES

Instructions on disposal and storage conditions.

DISPLAYS FOR SAFE USE

SAFETY SYMBOLS AND MEANINGS

Definitions of warning, caution, and prohibition icons.

SAFETY CAUTIONS

OPERATIONAL SAFETY WARNINGS

Critical alerts during operation.

PREVENTIVE SAFETY CAUTIONS

Important safety measures and preventive actions.

USAGE AND MAINTENANCE

USAGE GUIDELINES

Defines the instrument's intended medical use.

USER MAINTENANCE GUIDELINES

Basic maintenance tasks for the operator.

WARNING INDICATIONS AND POSITIONS

OPERATIONAL SAFETY ADVICE

Safety advice for specific operations.

OPTIONAL ACCESSORIES

CONFIGURATION

MAIN BODY COMPONENTS

Identifies key parts of the slit lamp.

PATIENT CONTACT PARTS AND MATERIALS

Lists materials for patient contact areas.

STANDARD ACCESSORIES

PREPARATIONS

POWERING ON THE SLIT LAMP

Steps to turn on the slit lamp.

DIOPTER AND PD ADJUSTMENT PROCEDURE

Procedure for optical and eye width adjustment.

OPERATION PROCEDURES

PATIENT POSITIONING

How to correctly position the patient.

MICROSCOPE UNIT OPERATION

Adjusting magnification.

BASE AND FOCUSING OPERATION

ILLUMINATION UNIT OPERATION

APERTURE/SLIT LENGTH AND SLIT ROTATION

FILTER SELECTION AND ENDING PROCEDURE

TROUBLESHOOTING

TROUBLESHOOTING GUIDE

Common problems and solutions.

SPECIFICATIONS AND PERFORMANCE

PERFORMANCE SPECIFICATIONS

Technical specifications of the microscope.

ENVIRONMENTAL CONDITIONS

ELECTROMAGNETIC COMPATIBILITY

ELECTROMAGNETIC IMMUNITY

OPTICAL RADIATION HAZARD

ELECTRIC RATING AND SAFETY DESIGNATIONS

DIMENSIONS AND WEIGHT

Physical characteristics of the device.

REFERENCES

PLUG SHAPE INFORMATION

Information on power plug types by country.

SYMBOLS DEFINITION

Explanation of symbols used.

MAINTENANCE AND CHECKUPS

PERIODIC MAINTENANCE

Regular checks before use.

DAILY CARE

Routine cleaning and protection.

ORDERING CONSUMABLES

How to order replacement parts.

REPLACING ILLUMINATION LAMPS

RESTOCKING CHINREST TISSUE

MAINTENANCE PROCEDURE

CLEANING LENSES AND PRISMS

Detailed instructions for lens cleaning.

CLEANING SLIDING PLATE, RAIL AND WHEEL SHAFT

DISPOSING THE PRODUCT

Final disposal instructions.

OPTIONAL ACCESSORIES

SYSTEM CONFIGURATION CHART

Diagram of system setup with accessories.

BEAM SPLITTER AND TV RELAY LENS

TV RELAY LENS TL-54/TL-55

TV ATTACHMENTS AND OBSERVATION TUBE

EXTERNAL FIXATION TARGET, EYEPIECES, TONOMETER MOUNTS

TONOMETER MOUNT, HRUBY LENS, PARALLEL VISION TUBE, YELLOW FILTER

Related product manuals

Preview: Topcon SL-D301

Preview: Topcon SP-1P

Preview: Topcon SP-3000P

Topcon SP-3000P

Preview: Topcon OMS-800