Topcon TRC-NW300 - Page 32

30
PREPARATIONS
Switching of internal/external fixation targets (The external fixation target is an
optional accessory.)
You can change the internal/external fixation targets.
When shipped, "INTERNAL" (internal fixation target) is set.
1 Select "FIXATION" on the "MENU" screen and press the .
2 Press the or to select "INT/EXT"
and then press the .
3 Press the or to select "INTER-
NAL" (internal fixation target) or "EXTERNAL" (external fixation target). Then, press the
.
ENTER SWITCH
MENU
FLASH
DCF / DCT
MODE
INT / EXT
MEMORY
FIXATION
DOWNWARD CURSOR SWITCH UPWARD CURSOR SWITCH
ENTER SWITCH
MENU
FLASH
DCF / DCT
MODE
INT / EXT
EXTERNAL
INTERNAL
MEMORY
FIXATION
DOWNWARD CURSOR SWITCH UPWARD CURSOR SWITCH
ENTER SWITCH
MENU
FLASH
DCF / DCT
MODE
INT / EXT
EXTERNAL
INTERNAL
MEMORY
FIXATION