Topdon BT600 - Selecting Test Parameters

2) Select the corresponding battery type and press [ENTER
/ PRINT]. The specic battery type is usually listed on the
battery label.
3) Select the corresponding battery standard and press [ENTER /
PRINT]. The specic battery standard will also be listed on the
battery label.
Please refer to the following table for specic battery
standards and test ranges.
EXIT
BATTERY TYPE
REGULAR FLOODED
AGM
GEL
EFB
ENTER
Figure 4.1.2
DIN
EN
GB
MCA
CA
EXIT
SELECT STANDARD
CCA
JIS
IEC
SAE
BCI
ENTER
Figure 4.1.3
Measurement
Standard
Measurement
Range
Description
Cold Cranking Amps, specied by
SAE & BCI, most
frequently used value for starting
battery at 0°F(-18°C)
100-2000CCA
EN I 14