4
Notice
General Information of OBDII (On-Board Diagnostics II)
Diagnostic Trouble Codes (DTCs)
Phoenix Plus 2 may automatically reset while being disturbed by strong static electricity. THIS
IS A NORMAL REACTION.
This user manual is subject to change without written notice.
Read the instructions carefully before operating and use the unit properly according to the
guide. Failure to do so may cause damage and/or personal injury, and will void the product
warranty.
The OBDII system is designed to monitor emission control systems and key engine
components by performing either continuous or periodic tests of speci c components and
vehicle conditions, which will offer three pieces of valuable information:
•
Whether the Malfunction Indicator Light (MIL) is commanded “on” or “off.”
•
Which, if any, Diagnostic Trouble Codes (DTCs) are stored
.
•
Readiness Monitor status.
To Next Page
Loading...
