17
TOPEX.PLTOPEX.PL
3. Unscrew two screws and remove back cover.
4. Remove old battery, insert new, full 6F22 battery while observing polarity, place the back
cover in its place and fix it with two screws.
FUSE REPLACEMENT
1. To replace blown fuse switch off the multimeter by setting its dial selector switch to “OFF”
position, disconnect test leads from multimeter terminals, unscrew two screws of the back
cover and remove it.
2. Remove blown fuse, insert new one F250mA/250V, place the back cover in its place and
fix it with two screws.
MULTIMETER MAINTENANCE
Wipe body and display screen with soft, dry cloth regularly.
Do not dispose of electrically powered products with household wastes, they
should be utilized in proper plants. Obtain information on wastes utilization from
your seller or local authorities. Used up electric and electronic equipment contains
substances active in natural environment. Unrecycled equipment constitutes a
potential risk for environment and human health.
To Next Page
Loading...