5
GENERAL REMARKS -2
INSTALLATION AND USE INSTRUCTIONS
S80
2.1- GENERAL INSTRUCTIONS
BEFORE INSTALLING AND USING THE ACTUATOR, IT IS COMPULSORY THAT THE INSTALLER
AND THE USER CAREFULLY READAND UNDERSTAND THIS MANUAL INALLITS PARTS.
THIS MANUAL IS INTEGRAL PART OF THE ACTUATOR AND MUST COMPULSORILY BE
PRESERVED FOR FUTURE REFERENCE.
THE ACTUATOR CAN BE USED EXCLUSIVELY BY A USER ACTING IN COMPLIANCE WITH THE
INSTRUCTIONS CONTAINED IN THIS MANUAL AND/OR IN THE MANUAL OF THE ACTUATOR
CONTROL DEVICE(E.G.: CONTROL UNIT).
2.4- RESERVED RIGHTS
Each information herein contained (text, drawings, diagrams, etc.) is reserved.
None part of this manual can be reproduced and disclosed (totally or partially) by any reproduction means
(photocopies, microfilms or other) without written authorization of the Manufacturer.
The reserved rights on this manual "Installation and use instructions" remain property of the Manufacturer.
2.2- INSTALLERAND USER
THE ACTUATOR INSTALLATION CAN BE PERFORMED EXCLUSIVELY BY COMPETENT AND
QUALIFIED TECHNICAL PERSONNEL SATISFYING THE PROFESSIONAL AND TECHNICAL
REQUIREMENTS FORESEEN BY THE LAWS IN FORCE IN THE COUNTRY OF INSTALLATION.
THE INSTALLATION TECHNICIAN SHALL ACCEPT FULL RESPONSIBILITY FOR ANY
INSTALLATION ERRORS AND FOR ANY FAILURE TO ADHERE TO THE INSTRUCTIONS
PROVIDED IN THIS MANUAL. THE INSTALLATION TECHNICIAN SHALL THEREFORE BE
EXCLUSIVELY LIABLE FOR ANY DAMAGES CAUSED TO USERS AND/OR THIRD PARTIES THAT
MAYARISEASA RESULT OF INCORRECT INSTALLATION.
IN ORDER FOR THE AUTOMATION UNIT TO OPERATE CORRECTLY, WE RECOMMEND
CARRYING OUT PERIODICAL MAINTENANCE ON IT,AS INDICATED IN PAR.7 OF THIS MANUAL.
2.3- TECHNICAL ASSISTANCE
Contact the installation technician or retailer for assistance.
THE MANUFACTURER HAS NO LIABILITY FOR ANY EVENTUAL DAMAGE TO PERSONS,
ANIMALS AND THINGS DUE TO THE INOBSERVANCE OF THE PRESCRIPTIONS DESCRIBED IN
THIS MANUAL.
THE WARRANTY ON THE ACTUATOR WILL NOT BE HONORED IF PRODUCT IS NOT INSTALLED AND
USED ACCORDING TO THE INSTRUCTIONS PROVIDED AND THE REGULATIONS SHOWN IN THIS
INSTRUCTION MANUAL AND IF IT IS USED WITH NONGENUINE PARTS, ACCESSORIES, SPARE
PARTSAND/OR CONTROL/FEEDING UNITS.
2.5-DESCRIPTION OF PERSONNEL
User:
USERS MUST NEVER PERFORM OPERATIONS RESERVED FOR MAINTENANCE PEOPLE OR
SPECIALISED TECHNICIANS. THE MANUFACTURER DECLINES ALL LIABILITY FOR DAMAGE
DERIVING FROM FAILURE TO OBSERVE THEABOVE REQUIREMENTS.
specialised person capable of operating the actuator under normal conditions by using the relative controls.
He/she must also be able to operate with the actuator under “maintenance” in order to perform simple routine
maintenance operations (cleaning), and start or reset the actuator following an unscheduled stop.
Specialised electrician:
A specialised electrician must be able to install the actuator, start it and operate it both in normal conditions and
in the maintenance mode; he/she is qualified to perform all electrical and mechanical adjustment and
maintenance operations. He/she is allowed to work on live electrical cabinets and junction boxes.
To Next Page
Loading...
Need help?
General
