Topshine MT06 - Page 10

User Manual of MT06
-
10
-
Note:
****** is user’s password and the default password is 000000. The tracker will only accept
commands from a user with the correct password. Commands with wrong password will be
ignored.
###### is the new password. Password should be 6 digits.
Example:
W000000,001,123456
Decription: 000000 is current password, 123456 is new password
④ Set APN by SMS
Command: W000000,011,APN,APN name, APN password
Description: APN name, APN username, APN password
If no password required, just put in APN name only.
Example: W000000,011,internet
⑤ Set IP Address and Port by SMS
Description: IP address is www.track-car.com, Port is 9700
SMS command: W<password>,012,<IP>,<port>
Example:
SMS send: W000000,012,www.track-car.com,9700
Tracker will reply message: Set ok.
⑥ Enable GPRS Function
Command: W<password>,013,X
Description: X=0,close GPRS(Default)
X=1,enable TCP
X=2,enable UDP
⑦ Set Time Interval for Sending GPRS Packet
Command: W<password>,014,XXXXX
Description: XXXXX should be in five digits and in unit of 10 seconds.
XXXXX =00000, to disable this function
XXXXX =00001~65535, time interval for sending GPRS packet and in unit of 10 seconds
Example: W000000,014,00005
Mean time interval is 50 seconds.
○
8
Get Google link
Command: W000000,100
○
9
Set over speed alarm
Command: W000000,005,XX
Description:
XX(the speed preset value)
XX=00, disable