Toptech TT-P-411 User Guide

This thermostat requires 24 Volt AC Power or two (2) properly installed
“AA” Alkaline batteries for proper operation. When connecting 24 Volt
AC Power the batteries may be installed as a backup.
For use only as described in this manual. Any other use will
void warranty.
TT-P-411
Single Stage Heat / Cool
Conventional and Heat Pump
1 Specification
2 Installation
3 Setting User Options
4 Setting Your Program
Schedule
5 Operating Your Thermostat
6 Additional Operation Features
7 Thermostat Maintenance
Warning
Turn off power to the heating or cooling
equipment before installation.
Attention
For installation by experienced service
technicians only. Follow applicable codes.
TT-P-421
Up to 2 Heat / 1 Cool
Conventional and Heat Pump
Read all instructions before proceeding.
This thermostat is compatible with:
  •Singlestageheat/coolconventionalandheatpumpsystems
  •Conventionalsystemsupto2heat/1cool (TT-P-421only)
  • Singlecompressorheatpumpsystemswithanauxiliaryheatstage (TT-P-421 only)
  •250–750millivoltheatonlysystems
Electrical and control specifications:
  •ElectricalRating:24VoltAC
  •1ampmaximumloadperterminal
  •ACPower:18–30VoltsAC
  •DCPower:3.0VoltDC(2“AA”AlkalineBatteriesIncluded)
  •ControlRange:45°–90°F(7°–32°C)
  •TemperatureAccuracy:+/-1°F(+/-.5°C)
Terminations
  •TT-P-411–Rc,Rh,O,B,Y,W,G,C
  •TT-P-421–R,O,B,Y1,E/W1,G,W2,C
1
Specifications
TTP-100-02
Model number is located on
thermostat sub-base.
Programmable Thermostats
®

Toptech TT-P-411 Specifications

General

Brand	Toptech
Model	TT-P-411
Category	Thermostat
Language	English