Toptech TT-P-411 - Resetting the Thermostat

6
4
Setting Your Program Schedule
Setting the Time and Day
1. Innormaloperatingmode,presstheDAY/TIME
button.Thedisplaywillswitchtotheday/time
 settingmodeandthehourwillbeashing.
2. Pressortoadjustthehour.
 PressDAY/TIME.
3. Pressortoadjusttheminute.PressDAY/TIME.
4. Pressortoadjustthedayoftheweek.PressRETURNtoexit.
Tips Before Setting Your Program Schedule
•Makesureyourcurrenttimeanddayoftheweekaresetcorrectly.
•Whenprogramming,makesuretheAMandPMindicatorsarecorrect.
• YourNIGHTeventcannotexceed11:50PM.
Thisthermostatcomespre-programmedwithadefaultenergysaving
program.Thefollowingtableoutlinesthepre-programmedtimesand
temperaturesforheatingandcoolingineachofyour4dailyweekdayand
weekendevents.Ifyouwishtousethesesettingsthennofurtherprogram-
mingisnecessary:
Programming a 5-2 Day Residential Schedule
The5-2dayresidentialprogrammingmodeallowsyoutoprogramMonday
-Fridaywithone4eventscheduleandthenallowsyoutochangeSaturday
andSundaywithadifferent4eventschedule.
1. TouchthePROG button.Thedisplaywillswitch
toprogrammingmode.ThedaysM,TU,W,TH,
 andFwillbedisplayedandthehourwill
 beashing.
2. MovetheSYSTEMswitchtoeithertheHEAT
 orCOOLposition.
3. Presstheortoadjustthehourforthe
 MORN(morning)event.PressPROG.
4. PressortoadjusttheminutefortheMORNevent.PressPROG.
Weekday Weekend
MORN
DAY
EVE
NIGHT
Time: 6:00 pm
Heat: 70˚ F (21˚ C)
Cool: 78˚ F (26˚ C)
Time: 8:00 am
Heat: 62˚ F (17˚ C)
Cool: 85˚ F (29˚ C)
Time: 6:00 am
Heat: 70˚ F (21˚ C)
Cool: 78˚ F (26˚ C)
Time: 10:00 pm
Heat: 62˚ F (17˚ C)
Cool: 82˚ F (28˚ C)
4 Event
Time: 6:00 pm
Heat: 70˚ F (21˚ C)
Cool: 78˚ F (26˚ C)
Time: 8:00 am
Heat: 62˚ F (17˚ C)
Cool: 85˚ F (29˚ C)
Time: 6:00 am
Heat: 70˚ F (21˚ C)
Cool: 78˚ F (26˚ C)
Time: 10:00 pm
Heat: 62˚ F (17˚ C)
Cool: 82˚ F (28˚ C)
Residential 5-2 Day Programming– Weekday/Weekend
Factory Settings