Topview A2281Wd+ - 3 Operation Instructions; General Instructions; Control Buttons

To Next Page

To Previous Page

22” LCD Color Monitor Topview A2281Wd+

3. Operating Instructions

3.1 General Instructions

Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the

monitor. By changing these settings, the picture can be adjusted to your personal preferences.

• The power cord should be connected.

• Connect the video cable from the monitor to the video card.

• Press the power button to turn on the monitor, the power indicator will light up.

3.2 Control Buttons

External Control Button

1. SOURCE

2. Auto Adjust button / Exit

3. -/ECO Mode

4. +/ Aspect control

5. MENU /ENTER

6. Power button

Front Panel Control

• /Power Button:

Press this button to turn the monitor ON or OFF, and display the monitor’s state.

• Power Indicator:

Blue — Power On mode

Orange — Off mode

• MENU / ENTER:

Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON.

• SOURCE:

Select the VGA or DVI function.

• -/Eco mode:

Press the Eco key continuously to select the Eco mode of brightness when there is no OSD.