To Next PageTo Next Page
Need help?Do you have a question about the Tormatic T100 DES and is the answer not in the manual?
Configures the upper [30] and lower [31] limits for the door's travel.
Adjusts the door to a pre-defined half-open state [32].
Precisely adjusts the top [33] and bottom [34] end-of-travel positions.
Selects the safety closing edge [35] and photocell [36] functions.
Sets the cut-off position for the safety edge [37].
Guides programming START [60] and half-open [61] functions for radio controls.
Lists common error codes and their likely causes or remedies.
Covers general safety advice, warnings, symbols, and safe working practices.
Includes spare parts, modifications, data plate, packaging, and technical data.
Introduces installation, programming overview, and operating instructions.
Covers maintenance, error diagnosis, guarantee terms, and inspection logs.
Details log book requirements and the declaration of conformity.
Lists tools, cover access, and wiring for mains, motor, impulse, and photocell connections.
Guides programming the top and bottom end-of-travel positions.
Covers slowing-down path, level adjustment, spring breakage, and force limits.
Details motor starting time and radio remote control setup.
Instructions for programming hand transmitters for start, half-open, and light functions.
Procedures for deleting radio codes and using DU functions.
Information on configuring the Wireless closing edge RadioBand module.
Details menu points for setting [30-34] door end-of-travel positions and adjustments.
Covers menu points for selecting closing edges [35] and photocells [36].
Explains settings for safety edge pre-limit switch [37] and operating modes [40].
Covers menu points for key switch [50], control address [52], and expansion control [54].
Details service intervals [53], smoke exhaust [55], radio [60-63], and DU functions [71-78].
Explains service menu items [91, 96-99] including factory reset.
Details Dead Man, Impulse OPEN/CLOSE, and AR modes for door control.
Explains half-opening, lighting, external commands, key switch, and radio transmitter usage.
Advises professional testing of the door system for safety.
Explains how the control unit signals the need for service or inspection.
Lists errors related to limit switches, photocells, and initial learning faults.
Covers self-test, control unit, and connection-related errors.
Details errors for impulse operation, safety features, and radio/expansion modules.
Explains errors related to menu blockages and authorized dealer access.
Emphasizes qualified personnel, maintenance instructions, and documentation.
Provides a checklist for verifying door system components and features during initial operation.
Declares conformity with Machinery, Construction Products, Low-voltage, and EMC Directives.
General| Brand | Tormatic |
|---|---|
| Model | T100 DES |
| Category | Control Unit |
| Language | English |
