Tornado 99130 Owner's Operation And Maintenance Manual

25
SOLUTION TANK ASSEMBLY
3 3 00128 Screw 59 2 17376 Nut (Included with Item #72)
4 1 32231 Drain Tube 60 1 18237 Charger Connector
5 2 18230 Clip, Sight Tube 61 1 18239 Connector Mtg. Plate
6 3 02956 Nut 62 1 18240 Light Mtg. Bracket (Included with Item #72)
7 1 03320 Screw 63 4 18253 Screw
8 1 18652 Solution Control Bracket 64 2 18309 Screw
9 2 04442 Screw 65 2 18336 Screw (Included with Item #72)
10 1 18328 Plate, Solution Control 67 2 05427 Screw
11 3 18261 Pin *68 1 18849 Decal-Wiring Diagram
12 8 18316 Retaining Ring 70 4 18642 1/4" Flat Washer
13 1 18329 Bar, Lower Link 71 4 03321 Washer-Plain .391 ID (ZP)
14 1 15677 Screw, Shoulder 72 1 18859 Warning Light Assembly Kit (Includes items 59, 62 & 65)
15 1 18486 Fitting 73 2 15639 Bulb (For Warning Light P/N 18859)
16 1 18457 Fill Door 75 2 18717 5/8” Dia. Cable Clamp
17 3 07626 Clamp 76 2 18309 Screw #10-24
18 1 18684 Bracket Sol. Valve Clamp 77 2 10892 Nut, #10-24
19 2 07533 Nut 78 1 19945 Screw-Truss Head ¼”-20 x 5/8”
20 1 31253 Valve, Solution Release 79 1 31649 Fitting, 3/8 NPT x 5/8” Barbed Hose
21 1 18485 Fitting 80 1 31647 Elbow Fitting, 3/8 NPT x ½” Barbed Hose
22 1 31646 Solution Tube ½” ID, 13” long 81 1 31645 Fitting, 3/8 NPT x ½” Barbed Hose
24 2 03736 Washer
25 1 31648 Runtee Fitting, 3/8 NPT
26 2 18253 Screw
27 1 18207 Solution Tank
28 1 18466 Plate, Control Handle Stop
29 1 18262 Pin
30 1 18330 Bar, Upper Link
31 1 03868 Nut
32 1 18319 Weldment, Solution Control Handle
33 2 16347 Bearing, Flange
34 1 18249 Bracket, Handle Pivot
35 3 16136 Screw
36 2 10894 Locknut
37 1 18431 Solution Tube - 20" (Model 99105, 99125 & 99126 Only)
*37 1 18433 Solution Tube - 24" (Model 99130 Only)
38 1 01589 Nut
39 1 01246 Washer
40 2 16581 Washer
41 4 01577 Washer
42 2 18339 Screw
44 4 16031 Screw
45 1 18229 Hinge
46 1 18251 Grip
*47 1 18308 Access Panel
48 1 18359 Stop Cable
49 1 30816 DECAL-TORNADO W/ LOGO
53 1 18377 Decal, Battery Maintenance
*54 1 18381 Decal, C.B. Identification
*55 1 15734 Decal, Level Gauge
56 10 06192 Screw
57 2 14544 Screw
*58 1 30812 Decal Tornado
*Not Shown
Special service note: All solution drainage tube components (see diagram opposite) between the Solution Tank (item
27) and the forward Solution Tube (item 37) are also available as a Solution Hose Kit #31657. Except for existing hose
clamps, this Kit includes all needed drainage components between the Solution Tank and the forward Solution Hose
(diagram items 25, 79, 80, 22, 81, 20, 21, & 18). The Kit offers better flow and reliability than any previous subsystem,
and is intended as a retrofit for any Series “D” EZ’s using an inline filter, as well as all earlier Series machines.
No. Qty Part No. Description No. Qty Part No. Description

Tornado 99130 Specifications

General

Brand	Tornado
Model	99130
Category	Floor Machine
Language	English