26 (64)
MAINTENANCE OPERATIONS
TKU--- C 01140--- 1 EN 0404
D
DD
D Check tire pressures
18.00 x 25 L5S Bridgestone
Front: 550 kPa (5.5 bar)
Rear: 400 kPa ( 4.0 bar)
D
DD
D Test transmission and the bucket and steering hyd raulics
The transmission and hydraulics should be at operating temperature during
measurement.
A Transmission: Press brake pedal, engage highest gear, and accelerate. T he engine
should achieve about a 2060--2160 r pm stalling speed.
B Bucket hydraulics: Lower the boom against the stops, keep the control valve in ”boom
down” position, and accelerate. The engine should achieve about a 2100--2200 rpm
stalling speed.
S Steering hydraulics: Turn the loader against the stops, keep the control valve in the
selected position, and accelerate. The engine should achieve about a 2100--2200 rpm
stalling speed.
Maintenance
Manual
Maintenance
Manual
Operator's
Manual
Operator's
Manual
Maintenance
Manual
Maintenance
Manual
Workshop
Manual
Workshop
Manual
Spare Part
Manual
Spare Part
Manual
To Next Page
Loading...