45 (64)
MAINTENANCE PROGRAM
TKU--- C 01140--- 1 EN 0404
4. MAINTENANCE PROGRAM
Every shift Page
Done
Check engine oil 17......................................................
Check V--belts 17........................................................
Check engine coolant level 17............................................
Check air filter indicator and assembly condition 18..........................
Check intake and exhaust ducting 18.......................................
Check fuel filter element 19...............................................
Check transmission oil 19.................................................
Check transfer gearbox oil 19..............................................
Check tires and wheel nuts 20.............................................
Check hydraulic oil level 20...............................................
Check hydraulic oil tank pressure 20.......................................
Test service and parking brake function 21..................................
Check that all controls are functioning correctly 21...........................
Check the emergency steering system (option) 21...........................
Check brake releasing pump function 21....................................
Check major components for oil leaks and proper mounting 21................
Check hand fire extinguisher 22............................................
Check driving/working lights 22............................................
Check gauges and indicator lights 22......................................
Fill fuel tank 22..........................................................
Fill the autom atic central lubrication system (option) 23.......................
Grease lift cylinder pins, tilt cylinder pins, and lift arm pins* 23.................
Grease ejector cylinder pins (option) 24.....................................
Grease side tipping cylinder pins (option) 24.................................
Grease center articulation, steering cylinder pins, and oscillating axle* 24.......
Grease dogbone pins 23..................................................
Check r em ote control system (option) 24....................................
* if automatic central lubrication is not installed
When completed
Date Engine hours....................... ................
Special Notes
Approved ............................
Maintenance
Manual
Maintenance
Manual
Operator's
Manual
Operator's
Manual
Maintenance
Manual
Maintenance
Manual
Workshop
Manual
Workshop
Manual
Spare Part
Manual
Spare Part
Manual
To Next Page
Loading...