60 (64)
MAINTENANCE PROGRAM
TKU--- C 01140--- 1 EN 0404
Every 2000 hours 2/2 Page
Done
Testbuckethydraulics,testB ...............................................
Record = 26..................................................
Teststeeringhydraulics,testS ..............................................
Record = 26..................................................
Check the emergency steering system (option) 21...........................
Check brake releasing pump function 21....................................
Test the hydraulic pressure s 40............................................
Check major components for oil leaks and proper mounting 21................
Check hand fire extinguisher 22............................................
Check driving/working lights 22............................................
Check gauges and indicator lights 22......................................
Check the instrument panel 28.............................................
Check cabin door and lock condition 27.....................................
Check junction boxes 28..................................................
Check cables 28........................................................
Fill fuel tank 22..........................................................
Fill the automatic central lubrication tank (option) 23..........................
Grease fan drive bearing fitting 39.........................................
Grease lift cylinder pins, tilt cylinder pins, and lift arm pins* 23.................
Grease ejector cylinder pins (option) 24.....................................
Grease side tipping cylinder pins (option) 24.................................
Grease center articulation, steering cylinder pins, and oscillating axle* 24.......
Grease dogbone pins 23..................................................
Grease driveshafts 28....................................................
Grease the stationary ends of boom/bucket pins 34..........................
Lubricate operator seat linkages 33........................................
Lubricate door and hatch hinges 33........................................
Check center articulation with dial gauge 37.................................
Wash radiator + oil coolers 25.............................................
General cleaning 27......................................................
Check r em ote control system (option) 24....................................
Service fire suppression system 34.........................................
Service hand fire extinguisher 43...........................................
* if automatic central lubrication is not installed
Maintenance
Manual
Maintenance
Manual
Operator's
Manual
Operator's
Manual
Maintenance
Manual
Maintenance
Manual
Workshop
Manual
Workshop
Manual
Spare Part
Manual
Spare Part
Manual
To Next Page
Loading...