49 (64)
MAINTENANCE PROGRAM
TKU--- C 01140--- 1 EN 0404
Every 125 hours 2/2 Page
Done
Grease center articulation, steering cylinder pins, and oscillating axle* 24.......
Grease dogbone pins 23..................................................
Grease driveshafts 28....................................................
Check r em ote control system (option) 24....................................
General cleaning 27......................................................
* if automatic central lubrication is not installed
When completed
Date Engine hours....................... ................
Special Notes
Approved ............................
Maintenance
Manual
Maintenance
Manual
Operator's
Manual
Operator's
Manual
Maintenance
Manual
Maintenance
Manual
Workshop
Manual
Workshop
Manual
Spare Part
Manual
Spare Part
Manual
To Next Page
Loading...