Toro 02656 - Adjusting the Self-Propel Cable

7.Disposeoftheusedoilproperlyatalocalrecycling
center.
AdjustingtheSelf-propel
Cable
ServiceInterval:Every25hours
1.Stoptheengine.
2.Pullthemachinebackwardswhileslowlyengaging
theself-propelbaruntiltherearrollerslock.The
self-propelbarshouldnowbe2.4in(6cm)fromthe
handlebar.
g018190
11
Figure20
1.2.4in(6cm)
3.Ifthedistancebetweentheself-propelbarandthe
handlebarislessthan2.4in(6cm),adjusttheblack
plasticcableadjustertosetthecorrectdistance.
g018191
1
Figure21
1.Cableadjuster
4.Whenfeasible,checkthespringontheself-propelcable
attachedtothegearboxtoensureitissetcorrectly.Use
themetaladjuster,andmakesuretheplasticadjusteris
fullywoundin.
g018192
1
2
Figure22
1.1/2inch(1.3cm)2.Self-propelspring
5.Oncethespringissetcorrectly,tightentheinnernut
tosecureitinplace.
16