Toro 03731 - Maintenance; Using the Kickstand When Tipping the Cutting Unit; Lubricating the Verticutter

Maintenance
UsingtheKickstandWhen
TippingtheCuttingUnit
Note:Whenevertheverticutterhastobetipped
toexposetheverticutterblades,usethekickstand
(suppliedwithtractionunit)(Figure15).
g195547
Figure15
1.Kickstand
LubricatingtheVerticutter
Eachverticutterhas5greasettings(Figure16)that
mustbelubricatedweeklywithNo.2lithiumgrease.
Thelubricationpointsarethefrontroller(2),therear
roller(2),andthereelmotorsplines(1).
Important:Lubricatingthecuttingunits
immediatelyafterwashinghelpspurgewaterout
ofthebearingsandincreasesbearinglife.
1.Wipeeachgreasettingwithacleanrag.
2.Applygreaseuntilyouseecleangreasecoming
outoftherollersealsandthebearingreliefvalve
(Figure16).
g029271
Figure16
1.Reliefvalve
3.Wipeanyexcessgreaseaway.
12