21
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Interval
Maintenance Procedure
After first 10 hours • Adjust traction belt drive
After first 25 hours
• Change the engine oil.
• Clean the fuel filter.
Every 25 hours
• Service the air filter pre-cleaner.
• Check for loose fasteners.
• Lubricate all grease fittings
Every 50 hours
• Clean the fuel filter and sediment bowl.
• Change the engine oil.
• Check the transmission fluid level.
• Adjust traction belt drive
Every 100 hours
• Check the cut-off bar adjustment.
• Service the air cleaner filter.
Every 200 hours
• Clean the combustion chamber.
• Replace the spark plug.
• Adjust the valves and torque the head bolts.
• Service the air cleaner filter.
Annually • Adjust reel drive chain
Important Refer to your engine operator’s manual for additional maintenance procedures.
To Next Page
