Toro 07264 User Manual

Step
3
Installing the Bumper
Parts needed for this step:
1 Bumper
Procedure
Note: T his procedure is only needed for Model
No . 07264TC .
1. R emo v e the 2 bolts , w ashers , and n uts secured
to the front of the frame .
2. Align the mounting holes and secure the
bumper to the frame with the fasteners
previously remo v ed ( Figure 5 ).
Figure 5
1. Bumper
Step
4
Installing the Seats
Parts needed for this step:
2 Seat
Procedure
Note: T his procedure is only needed for Model
No . 07264TC .
Inser t the seat brac k et into the seat base opening
and pi v ot the seat do wnw ard ( Figure 6 ).
Figure 6
1. Seat bracket 2. Seat base
Step
5
Installing the Hitch
Parts needed for this step:
1
Hitch
Procedure
Note: T his procedure is only needed for Model
No . 07264TC .
1. R emo v e the 4 bolts and n uts from the inside
rear of the frame .
2. Align the hitc h with the mounting holes on the
frame . Secure the hitc h with the screws and
n uts ( Figure 7 ).
13

Toro 07264 Specifications

General

Brand	Toro
Model	07264
Category	Automobile
Language	English