Toro 22302TE - Assembly; Loose Parts; Installing the Valve Lever

9
Assembly
Loose Parts
Note: Use the chart below to verify all parts have been shipped.
DESCRIPTION QTY. USE
V alve lever
Jam nut
1
1
Install valve lever
Key 2 Start the engine
Installing the V alve Lever
1. Thread the lever into the pump selector valve
(Fig. 3).
Note: The lever should be installed with the
bend toward the operator.
2. Tighten the jam nut on the lever to lock it in
position.
1
m–3883
Figure 3
1. Pump selector lever