Toro 22550 - Product Overview; Specifications; Operation; Installing and Removing the Attachment

ProductOverview
g272256
Figure3
1.Attachmentplate
2.Levelerframe
Specications
Note:Specicationsanddesignaresubjectto
changewithoutnotice.
Overallwidth185cm(73inches)
Overalldepth127cm(50inches)
Overallheight58cm(23inches)
Bolt-onedge
1.6x15.2cm(5/8x6inches)
ApproximateWeight
386kg(850lb)
Toensureoptimumperformanceandcontinuedsafety
certicationofthemachine,useonlygenuineT oro
replacementpartsandaccessories.Replacement
partsandaccessoriesmadebyothermanufacturers
couldbedangerous,andsuchusecouldvoidthe
productwarranty.
Operation
Determinetheleftandrightsidesofthemachinefrom
thenormaloperatingposition.
InstallingandRemoving
theAttachment
RefertotheOperator’sManualforthetractionunitfor
theinstallationandremovalprocedure.
Important:Beforeinstallingtheattachment,
positionthemachineonalevelsurface,ensure
thatthemountplatesarefreeofanydirtordebris,
andensurethatthepinsrotatefreely.Ifthepins
donotrotatefreely,greasethem.
Note:Alwaysusethetractionunittoliftandmove
theattachment.
WARNING
Ifyoudonotfullyseatthequick-attach
pinsthroughtheattachmentmountplate,
theattachmentcouldfalloffthemachine,
crushingyouorbystanders.
Ensurethatthequick-attachpinsarefully
seatedintheattachmentmountplate.
LevelingtheGround
Whenlevelingtheground,anglethelevelerslightly
tokeeptheforwardedgehigherthantherearedge.
Therefore,whendrivingthetractionunitforward,the
edgefarthestfromthetractionunitshouldbehigher;
whendrivinginreverse,theedgeclosesttothe
tractionunitshouldbehigher.
5