Toro 23208 - Product Overview; Controls

ProductOverview
g013171
Figure4
1.Reverse
safety
plate
3.Engine
5.Tie-down/lift
point
7.Chip
shield
2.Control
panel
4.Battery6.Track
8.Grinder
Controls
Becomefamiliarwithallthecontrols(Figure5)before
youstarttheengineandoperatethemachine.
ControlPanel
g025098
Figure5
1.Keyswitch5.Tractioncontrol
2.Throttlelever
6.Referencebar
3.Chokelever7.Grinder
control/hydraulic-liftlever
4.Hourmeter
KeySwitch
Thekeyswitch,usedtostartandshutofftheengine,
has3positions:OFF,RUN,andSTART.Referto
StartingtheEngine(page16).
ThrottleLever
Movethecontrolforwardtoincreasetheenginespeed
andrearwardtodecreasetheenginespeed.
ChokeLever
Beforestartingacoldengine,movethechokelever
forward.Aftertheenginestarts,regulatethechoke
tokeeptheenginerunningsmoothly.Assoonas
possible,movethechokeleverallthewayrearward.
Note:Awarmenginerequireslittleornochoking.
HourMeter
Whentheengineisoff,thehourmeterdisplaysthe
numberofhoursofoperationthathavebeenlogged
onthemachine.
11