Toro 25430 - Completing the Work for the Day; Completing the Project

CompletingtheWorkforthe
Day
Whenyoucompleteyourworkfortheday,dothefollowing:
1.Backllthespoilsinthepart(s)ofthetrenchinwhich
youarenishedworking.
2.Movethemachinetoasafeandstablelocation.
3.MoveallleverstotheNeutralposition.
4.Engagetheparkingbrake.
5.Lowerallattachmentstotheground.
6.Letthemachineidleforafewmomentstocoolit
down.
7.Shutofftheengine,waitforallmovingparttostop,
andremovetheignitionkey.
8.TurnthebatterydisconnectswitchtotheDisconnect
position.
CompletingtheProject
1.Afteryoucompletetheproject,returnthespoilsback
intothetrenchwiththebackllblade;refertoUsing
theBackllBlade(page29).
2.Returnthespoilsintothetrench.
A.Movethemachinetotheendofthetrench,afew
feet(meters)awayfromthespoilpile.
B.Aimthemachineattheouteredgeofthepile.
C.Adjustthebackllbladetottheslopeofthe
ground.
D.Movetheouteredgeofthespoilpiletowardthe
trench.
Note:Makeatleast2passesatthepiletomove
it.
E.Repeatthestepsaboveforthespoilpileonthe
othersideofthetrench.
F.Floatthebackllbladeoverthelengthofthe
trench.
3.Spraythedirtandmudoffthemachinewithwater.
Note:Donotspraytheconsoleorelectrical
componentswithwater.
4.Transportthemachinefromthecompletedworksite;
refertoTransportingtheMachine(page30).
32