Toro 30353 - Lubrication

Lubrication
GreasingtheBearingsandBushings
ServiceInterval:Every50hours
Themachinehasgreasettingsthatmustbelubricated
regularlywithNo.2GeneralPurposeLithiumBase
Grease.Ifthemachineisoperatedundernormal
conditions,lubricateallbearingsandbushingsafter
every50hoursofoperation.Bearingsandbushings
mustbelubricateddailywhenoperatingconditionsare
extremelydustyanddirty.Dustyanddirtyoperating
conditionscouldcausedirttogetintothebearings
andbushings,resultinginacceleratedwear.Lubricate
thegreasettingsimmediatelyaftereverywashing,
regardlessofintervalspecied.
1.Wipethegreasettingscleansoforeignmatter
cannotbeforcedintothebearingorbushing.
2.Pumpgreaseintothettings.
3.Wipeoffexcessgrease.
Figure16
16