Toro 30495 - Page 6

To Next Page

To Previous Page

decal106-9290

106-9290

1.Inputs5.Inseat

9.Outputs13.Start

2.Notactive

6.Powertakeoff(PTO)10.Powertakeoff(PTO)

14.Power

3.Hightemperatureshutdown

7.Parkingbrakeoff

11.Start

4.Hightemperaturewarning8.Neutral

12.Energizetorun(ETR)

Main Page

Table of Contents3
Safety4
General Safety4
Safety and Instructional Decals4
Setup12
Raising the Roll Bar12
Installing the Cutting Unit12
Adjusting the Left, Front Caster Wheel12
Checking the Tire Pressure13
Installing Weights (for CE Compliance)14
Checking the Fluid Levels15
Installing the Decal (CE Machines Only)15
Product Overview15
Controls15
Specifications18
Attachments/Accessories19
Before Operation19
Before Operation Safety19
Adding Fuel20
Checking the Engine-Oil Level22
Checking the Cooling System22
Checking the Hydraulic System22
Adjusting the Roll Bar22
Using the Safety-Interlock System23
Positioning the Seat24
Changing the Seat Suspension25
Unlatching the Seat25
During Operation25
During Operation Safety25
Operating the Parking Brake27
Starting the Engine27
Driving the Machine28
Shutting off the Engine29
Operating the Mower29
Adjusting the Height of Cut30
Operating Tips30
After Operation31
General Safety31
Pushing the Machine31
Hauling the Machine32
Loading the Machine33
Maintenance34
Maintenance Safety34
Recommended Maintenance Schedule(S)34
Daily Maintenance Checklist36
Lubrication37
Greasing the Bearings and Bushings37
Servicing the Cutting-Unit Gearbox Lubricant37
Engine Maintenance38
Engine Safety38
Checking the Air Cleaner38
Servicing the Air Cleaner39
Servicing the Engine-Oil39
Fuel System Maintenance41
Servicing the Water Separator41
Draining the Fuel Tank41
Inspecting the Fuel Lines and Connections41
Bleeding the Fuel System42
Bleeding Air from the Injectors42
Electrical System Maintenance43
Electrical System Safety43
Servicing the Battery43
Storing the Battery43
Checking the Fuses43
Drive System Maintenance44
Checking the Tire Pressure44
Replacing the Caster Wheels and Bearings44
Cooling System Maintenance45
Cooling System Safety45
Coolant Specification45
Checking the Cooling System46
Cleaning the Radiator46
Brake Maintenance47
Adjusting the Parking-Brake Interlock Switch47
Belt Maintenance48
Checking the Alternator-Belt Tension48
Controls System Maintenance48
Adjusting the Control-Lever Neutral-Interlock Switch48
Adjusting the Control-Lever Neutral Return49
Adjusting the Traction Drive for Neutral50
Adjusting the Maximum Ground Speed51
Adjusting the Tracking52
Hydraulic System Maintenance53
Hydraulic System Safety53
Hydraulic Fluid Capacity53
Hydraulic Fluid Specification53
Checking the Hydraulic System53
Changing the Hydraulic Fluid and Filter54
Cleaning55
Cleaning under the Cutting Unit55
Waste Disposal55
Storage55
Storage Safety55
Preparing the Machine for Storage55
Preparing the Engine56

Toro 30495 - Page 6

Table of Contents

Related product manuals