Toro 30582 Groundsmaster 580-D - Table of Contents

2
All Rights Reserved
Printed in the USA
W 2005 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
CALIFORNIA
Proposition 65 Warning
Diesel engine exhaust and some of its constituents
are known to the State of California to cause
cancer, birth defects, and other reproductive harm.
Warning
Contents
Page
Introduction 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safe Operating Practices 3. . . . . . . . . . . . . . . . . . . .
Toro Riding Mower Safety 5. . . . . . . . . . . . . . . . . .
Sound Pressure Level 6. . . . . . . . . . . . . . . . . . . . . .
Sound Power Level 6. . . . . . . . . . . . . . . . . . . . . . .
Vibration Level 6. . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety and Instruction Decals 7. . . . . . . . . . . . . . . .
Specifications 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Traction Unit 13. . . . . . . . . . . . . . . . . . . . . . . . . . . .
All Cutting Units 14. . . . . . . . . . . . . . . . . . . . . . . . .
Triflex Cutting Unit (Front) 14. . . . . . . . . . . . . . . . .
Outboard Cutting Units 15. . . . . . . . . . . . . . . . . . . .
Dimensions 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optional Equipment 15. . . . . . . . . . . . . . . . . . . . . . .
Setup 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking the Batteries 16. . . . . . . . . . . . . . . . . . . . .
Before Operating 18. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking the Engine Oil 18. . . . . . . . . . . . . . . . . . .
Checking the Cooling System 19. . . . . . . . . . . . . . .
Checking the Hydraulic System Fluid 19. . . . . . . . .
Filling the Fuel Tank 20. . . . . . . . . . . . . . . . . . . . . .
Checking the Tire Pressure 20. . . . . . . . . . . . . . . . . .
Checking Systems Operation 20. . . . . . . . . . . . . . . .
Checking Cutting Unit Mismatch 20. . . . . . . . . . . . .
Adjusting the Height of Cut 21. . . . . . . . . . . . . . . . .
Adjusting the Skids 22. . . . . . . . . . . . . . . . . . . . . . .
Operation 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Controls 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting and Stopping the Engine 27. . . . . . . . . . . . .
Bleeding the Fuel System 27. . . . . . . . . . . . . . . . . . .
Diagnostic Light 28. . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnostic ACE Display 28. . . . . . . . . . . . . . . . . . .
Checking the Interlock Switches 28. . . . . . . . . . . . .
Checking the Warning Indicator Lights 32. . . . . . . .
Pushing or Towing the Machine 32. . . . . . . . . . . . . .
Operating Characteristics 32. . . . . . . . . . . . . . . . . . .
Maintenance 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Maintenance Schedule 35. . . . . . . . .
Daily Maintenance Checklist 36. . . . . . . . . . . . . . . .
Service Interval Chart 37. . . . . . . . . . . . . . . . . . . . . .
Lubrication 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine Oil and Filter 40. . . . . . . . . . . . . . . . . . . . . .
Engine Fuel System 41. . . . . . . . . . . . . . . . . . . . . . .
Engine Cooling System 42. . . . . . . . . . . . . . . . . . . .
General Air Cleaner Maintenance 43. . . . . . . . . . . .
Servicing the Air Cleaner 43. . . . . . . . . . . . . . . . . . .
Servicing the Hydraulic System 44. . . . . . . . . . . . . .
Servicing the Planetary Gear Drive 46. . . . . . . . . . .
Servicing the Battery 47. . . . . . . . . . . . . . . . . . . . . .
Fuses and Circuit Breaker 48. . . . . . . . . . . . . . . . . .
Servicing the Brake System 48. . . . . . . . . . . . . . . . .
Wheels and Tires 49. . . . . . . . . . . . . . . . . . . . . . . . .
Cutting Unit Lubrication 49. . . . . . . . . . . . . . . . . . .
Blade Maintenance 49. . . . . . . . . . . . . . . . . . . . . . . .
Blade Bolt Torque 50. . . . . . . . . . . . . . . . . . . . . . . . .
Removing the Cutting Unit Blade 51. . . . . . . . . . . .
Inspecting and Sharpening the Blade 51. . . . . . . . . .
Adjusting Cutting Unit Belt Tension 52. . . . . . . . . .
Replacing the Blade Drive Belts 52. . . . . . . . . . . . .
Separating Cutting Units from the Traction Unit 54.
Checking and Correcting Cutting Blade Mismatch 55
Adjusting the Winglet Stabilizers 56. . . . . . . . . . . . .
Adjusting the Traction Control Rod 56. . . . . . . . . . .
Cylinder Head Bolts 56. . . . . . . . . . . . . . . . . . . . . . .
Engine Valve Clearance 56. . . . . . . . . . . . . . . . . . . .
Inspect and Adjust Fuel Injection Nozzles 56. . . . . .
Electrical Schematic 57. . . . . . . . . . . . . . . . . . . . . . .
Controller Electrical Schematic 58. . . . . . . . . . . . . .
Hydraulic Schematic 59. . . . . . . . . . . . . . . . . . . . . .
The Toro General Commercial Products Warranty 60. .