Need help?Do you have a question about the Toro Groundsmaster 580-D and is the answer not in the manual?
General| Fuel Type | Diesel |
|---|---|
| Transmission | Hydrostatic |
| Deck Lift | Hydraulic |
| Cutting Height | 1.5 - 5 inches |
| Turning Radius | 18 inches |
| Standard Tires | 26 x 12-12 |
Identifies hazards and provides safety messages for injury prevention.
Instructions from CEN, ISO, and ANSI standards for safe machine use.
Emphasizes operator training and familiarity with controls and safety.
Procedures for preparing the machine and work area before operation.
General guidelines for operating the machine safely.
Specific safety information applicable to Toro riding mowers.
Information on sound and vibration levels of the unit.
Location and importance of safety decals and instructions.
Summary of daily checks and specifications/intervals.
Explanation of the machine's various controls.
Detailed technical specifications of the traction unit.
Specifications for all cutting units, including front and outboard.
Physical dimensions and available optional equipment.
Steps for initial setup, including battery checks.
Essential checks before operating the machine.
Instructions for safely filling the fuel tank.
How to adjust the cutting height of the units.
Overview of controls, gauges, and warning indicators.
Explanation of key switch, speed, lift, throttle, and PTO controls.
Traction pedal, steering, and brake pedal functions.
Procedures for starting and stopping the engine safely.
Steps to bleed air from the fuel system.
Interpreting the diagnostic light for system status.
Verifying the function of safety interlock switches.
Checking the output functions of the electronic controller.
Practice operating the machine in a safe area.
How to engage and use four-wheel drive.
Procedures for mowing and handling obstacles.
Guidelines for high range operation and cruise control.
Procedures for safely stopping the machine.
Maintenance schedules, checklists, and interval charts.
Maintenance for oil, filter, fuel, cooling, and air cleaner systems.
Maintenance for hydraulic, planetary drive, battery, brakes, and fuses.
Maintenance for wheels, tires, blades, belts, and unit adjustments.
Wiring diagrams for Model 30582 and 30583.
Hydraulic system diagrams for Model 30582 and 30583.
To Next Page
