15
Outboard Cutting Units
Type
Two, three spindle, side mounted rotary cutting units each with a 57 in. (145 cm)
width of cut.
Trimming Ability
Trims to either side. 58 in. (147 cm) cutting unit offset from outside of wheel to trim
side of side cutting unit on either side.
Height-of-Cut Adjustment 1/2 in. (12.7 mm) increments by spacers on all castor shafts.
Cutter Drive Hydraulic gear motor. Three “B” section belts to spindles.
Castor Wheels Four 10.50 x 3.50 heavy duty, interchangeable, pneumatic castor wheels.
Cutting Unit Suspension
Outboard cutting unit arms pivot from center, sweep cutting units forward in mow
and lift, and rotate cutting units down and back in transport. Arms have rubber
mount design for shock absorption and more cutting unit floatation (patented).
Adjustable, spring-loaded, breakaway arms release and rotate outboard cutting unit
upon accidental impact. Automatically reset when cutting unit is raised. Cam lock
links automatically secure outboard cutting units in transport position.
Dimensions
Machine Width (approx.)
Transport: 7 ft. 11 in. (241 cm)
Mow: 16 ft. 3 in. (495 cm)
Machine Height (approx.)
Transport: 7 ft. 7 in. (231 cm) to top of raised cutting units
Mow: 7 ft. (210 cm) to top of ROPS
Machine Overall Length
(approx.)
14 ft. (427 cm)
Model 30582
Total Weight (with fluids)
(approx.)
6540 lb. (2967 kg)
Model 30583
Total Weight (with fluids)
(approx.)
6640 lb. (3012 kg)
Optional Equipment
Canopy option
Canopy w/ windshield option
Cab with Roll Over Protection System
Road Light Package
8 ft (244 cm) Rotary Broom
Air Conditioning
7 Foot Snow blower
Leaf Mulcher
Foam Filled Castor Tires
Front PTO Hydraulic Conversion Kit
Optional Tire
To Next Page
Loading...
