Need help?Do you have a question about the Toro Groundsmaster 5900 Series and is the answer not in the manual?
General| Deck Lift | Hydraulic |
|---|---|
| Cutting Width | 16 ft (4.9 m) |
| Drive System | 4WD |
| Cutting Height | 1 - 6 inches (2.5 - 15.2 cm) |
| Ground Speed | 0-17 mph (0-27.4 km/h) |
| Transmission | Hydrostatic |
| Turning Radius | Zero-turn |
| Standard Tires | 26 x 12-12 |
Explains the DANGER safety symbol and its implications for serious injury or death.
Explains the WARNING safety symbol and its implications for serious injury.
Explains the CAUTION safety symbol and its implications for minor to moderate injury.
Covers pre-operation checks, warnings, and fuel handling safety for Groundsmaster 5900/5910.
Lists recommended fastener torque values for various applications, including inch and metric series.
Explains the GEARS method: Gather Information, Evaluate Causes, Assess Performance, Repair, Solution Confirmation.
Provides charts for diagnosing general hydraulic system performance issues like leaks and overheating.
Details problems related to machine operation in one direction, sluggishness, and loss of traction power.
Covers PTO and Lift/Lower circuit problems, including decks not operating or moving slowly.
Troubleshooting steps for issues like no electrical power, starter clicking, or engine cranking but not starting.
Illustrates the flow of hydraulic fluid for Traction, PTO, Lift/Lower, and Steering circuits.
Details precautions and procedures for testing various hydraulic circuits like traction, PTO, lift/lower, and steering.
Provides procedures for testing electrical components like fuses, relays, switches, TECs, and sensors.
Provides detailed disassembly, inspection, and assembly procedures for blade spindles.
Provides the overall hydraulic schematic for Groundsmaster 5900 and 5910 machines.
To Next Page
