Toro Groundsmaster 5900 Series - Front Cutting Deck Winglets

FrontCuttingDeckWinglets
g299360
Figure324
1.Centerdeck4.Greasetting7.Locknut(2perwinglet)
2.LHdeckwinglet
5.Eccentric(2perwinglet)8.Hingepin(2perwinglet)
3.Flangebushing(4perwinglet)6.Capscrew(2perwinglet)
FrontCuttingDeckWingletDisassembly(Figure324)
1.Parkmachineonalevelsurface,lowerfrontcuttingdeck,stopengineand
removekeyfromthekeyswitch.
2.Removecoversfromfrontcuttingdeck.
3.Usea⅜”or½”driveratchetorbreakerbartorelieveidlerpulleytensionand
removeupper(winglet)drivebelt.
4.Forassemblyandalignmentpurposes,recordthepositionofthefrontwinglet
deckeccentricspacers:
A.Useamarkerorpaintpentorecordthelocationofeacheccentricspacer
directlyonthespacer(rightfront,rightrear,etc).
B.Useamarkerorpaintpentorecordthepositionofeacheccentricspacer
bydrawingalineacrosseacheccentricspacerandthedeckbracket
(Figure325).
5.Removelocknut,capscrew,eccentricspacerandhingepinfromfrontand
rearwinglethinges.Useaccessholeindeckbracketstoremoveeccentric
spacersfromdeck.Slidewingletawayfromfrontdeck.
6.Inspecthingepin,eccentricspacersandangebushingsindeckwinglet.
Replacewornordamagedcomponentsasnecessary.
CuttingDecks:ServiceandRepairs
Page8–6
Groundsmaster
®
5900&5910
16227SLRevB