Toro 31202 - Lubrication; Greasing the Bearings and Bushings

Lubrication
GreasingtheBearingsand
Bushings
ServiceInterval:Every50hoursGreasethebearing
andbushinggreasettingsmore
frequentlyinextremelydustyand
dirtyconditions.
Themachinehasgreasettingsthatyoumust
lubricateregularlywithNo.2lithiumgrease.Lubricate
thegreasettingsimmediatelyaftereverywashing,
regardlessofintervalspecied.
1.Wipethegreasettingscleansothatforeign
mattercannotbeforcedintothebearingor
bushing(Figure66).
2.Pumpthegreaseintothettings.
3.Wipeoffanyexcessgrease.
g278285
Figure66
Shownwithcuttingunitinstalled
49