Stopping the Rotor Blades
T o stop the rotor blades , release the control bar ( Figure 19 ).
Figure 19
Adjusting the Discharge Chute
T o adjust the disc harg e c hute , rotate the c hute crank and
mo v e the c hute deflector handle as sho wn ( Figure 20 ).
Figure 20
1. Chute handle 2. Chute deector handle
Preventing Freeze-up after Use
• Let the engine r un for a few min utes to prev ent mo ving
par ts from freezing . Stop the engine , w ait for all
mo ving par ts to stop , and remo v e ice and sno w from
the sno wthro w er .
• With the engine off , pull the recoil star ter handle
sev eral times and push the electric star t button once
(if applicable) to prev ent the recoil and electric star ters
from freezing up .
Operating Tips
T he r otor blades can thr o w stones, toys, and other
f or eign objects and cause serious per sonal injur y to
the operator or to bystander s.
• K eep the ar ea to be clear ed fr ee of all objects that
the r otor blades could pick up and thr o w .
• K eep all childr en and pets a w ay fr om the ar ea
of operation.
• R emo v e the sno w as soon as possible after it falls .
• T o self-propel, raise the handle and tilt the sno wthro w er
slightly forw ard, lifting the wheels off the g round.
T he more y ou tilt the handle forw ard, the faster the
sno wthro w er self-propels .
• If the sno wthro w er does not propel itself forw ard on
slipper y surfaces or in hea vy sno w , push forw ard on
the handle , but allo w the sno wthro w er to w ork at its
o wn pace .
• Ov erlap eac h sw ath to ensure complete sno w remo v al.
• Disc harg e the sno w do wnwind whenev er possible .
• In sno wy and cold conditions , some controls and
mo ving par ts ma y freeze . Do not use ex cessi v e force
when tr ying to operate frozen controls . If y ou ha v e
difficulty operating any control or par t, star t the engine
and let it r un for a few min utes .
10
To Next Page
Loading...
