Toro 4250 - SCAMP MODELS SELF-PROPELLED DRIVE BELT REPLACEMENT AND SERVICING; V BELT REMOVAL OR REPLACEMENT

SCAMP MODELS
REPLACEMENT AND SERVICING
SELF-PROPELLED DRIVE BELT
V BELT REMOVAL OR REPLACEMENT
SAFETY WARNING: To prevent start-
ing engine, disconnect spark plug lead
and remove spark
plug.
The “V” belt used on the utility self-propelled model
mowers
is a SPECIAL BELT. DO NOT USE A
SUBSTITUTE. It won’t work as WELL
or as LONG.
To remove the belt:
1. Remove four belt guard cover screws and
remove cover.
2. Turn mower up on side and remove nut, blade
and collar. Remove three bolts securing muffler and
crankshaft support. Remove muffler.
19-44 SERVICE BULLETIN REFERENCES
1983