Toro 51932 - User Manual

28 pages

To Next Page

To Next Page

Loading...

Form No. 3329-634

TrimmedBrushcutter

Model No. 51930--230000001 & Up

Model No. 51932-230000001 & Up

Model No. 51934--230000001 & Up

Model No. 51930A--230000001 & Up

Model No. 51932A--230000001 & Up

Model No. 51934A--230000001 & Up

Model No. 51936--230000001 & Up

Model No. 51938--230000001 & Up

Model No. 51940--230000001 & Up

Operator's Manual

........................!

English (E.N), Fre*lch (F), and Spanish (ES)

Table of Contents

Questions and Answers:

D
Daniel PorterAug 6, 2025
Why won't my Toro 51932 engine start?
- S
  swintersAug 6, 2025
  If your Toro Brush Cutter engine won't start, first, ensure the switch is in the I (ON) position. If it still doesn't start, check for a spark by removing the spark plug, reattaching the cap, and laying it on the metal cylinder while pulling the starter cord. If there's no spark, try a new spark plug. Also, make sure the primer bulb fills with fuel when pushed. If it does not, the fuel delivery system may be blocked. If the bulb fills, the engine may be flooded. If the starter cord pulls harder than when new, contact an authorized service dealer.
A
Ashley MontoyaAug 11, 2025
Why does my Toro Brush Cutter engine emit excessive smoke and not reach full speed?
- M
  Misty RyanAug 11, 2025
  If your Toro Brush Cutter engine doesn't reach full speed and emits excessive smoke, ensure you are using fresh fuel and the correct 2-cycle oil mix. Also, check and clean the air filter and the spark arrestor screen.
S
Steven RobinsonAug 15, 2025
What to do if the line will not advance when using automatic line lengthening on my Toro Brush Cutter?
- K
  Kristopher MillerAug 15, 2025
  If the line won't advance when using the automatic line lengthening feature on your Toro Brush Cutter, try lubricating the line with silicone spray if it's welded to itself. If there's not enough line, install more. You can also pull the line while pressing down on and releasing the retaining cap if the line is worn too short. If the line is tangled, remove it and rewind it. Finally, make sure the engine is at full throttle when advancing the line.
B
Benjamin ChavezAug 20, 2025
Why is oil dripping from the muffler of my Toro Brush Cutter?
- C
  Charles RobinsonAug 21, 2025
  If oil drips from the muffler of your Toro Brush Cutter, try operating the product at full throttle. Also, ensure you are using fresh fuel and the correct 2-cycle oil mix, and check and clean the air filter.
D
David LaneAug 27, 2025
How to prevent grass from wrapping around the trimmer head of my Toro 51932 Brush Cutter?
- M
  mary08Aug 27, 2025
  To address grass wrapping around the trimmer head assembly and attachment shaft of your Toro Brush Cutter, cut tall grass from the top down and operate the product at full throttle.
T
timothywoodAug 31, 2025
What to do if the retaining cap is hard to turn on my Toro Brush Cutter?
- G
  Garrett BarryAug 31, 2025
  If the retaining cap is hard to turn when using the automatic line lengthening feature on your Toro Brush Cutter, clean the threads and lubricate them with grease. If that doesn't solve the problem, replace the retaining cap.

Toro 51932 Specifications

General

Brand	Toro
Model	51932
Category	Brush Cutter
Language	English

Summary

Trimmer;Brushcutter

Operators Manual

Guide for using and maintaining the trimmer/brushcutter.

Important Information

Fueling and Starting Guidance

Instructions on how to safely fuel and start the engine, including cold vs. warm starting.

Introduction

Signal Word Definitions

Explains hazard levels indicated by DANGER, WARNING, CAUTION, Important, and Note.

Safety Rules

Operator and Work Area Safety

Covers operator condition, stance, work area hazards, and bystander safety.

Product and Operation Safety

Details safe fueling, product control, stopping, blade thrust, and proper usage.

Symbols

Safety and Operation Symbols

Identifies and explains various safety and operational symbols for user understanding.

Specifications

Product Details and Applications

Provides engine specs, cutting width, line size, weight, and product uses.

Features

Common Product Features

Describes features shared across different models, like engine and design.

Brushcutter Specific Features

Details features unique to the brushcutter models, like blades and guards.

Unpacking

Unpacking Instructions

Steps for safely removing and inspecting the product from the box.

Packing List

Itemized list of components included in the product packaging.

Assembly

Connecting and Removing Attachments

Instructions for attaching and detaching the cutting head or brushcutter.

Attaching Handles and Straps

Steps for mounting the front handle and attaching the shoulder strap.

Attaching Grass Deflector

Instructions for fitting the grass deflector to different shaft types.

Converting Brushcutter to Trimmer

Detailed procedure for converting the brushcutter model to a trimmer.

Converting Trimmer to Brushcutter

Detailed procedure for converting the trimmer model to a brushcutter.

Operation

Fueling Procedures

Steps for safely mixing fuel and filling the fuel tank.

Filling the Tank

Detailed instructions for adding fuel to the product's tank.

Starting and Stopping the Product

Explains how to start and stop the engine for both cold and warm conditions.

Trimmer Operation

Guidance on operating both curved and straight shaft trimmer models.

Advancing Cutting Line

Instructions on how to extend the cutting line while the trimmer is running.

Brushcutter Operation

Guidance on how to safely operate the brushcutter.

Maintenance

Emissions Maintenance Schedule

Schedule for maintaining emission control parts.

Cleaning and Servicing the Product

Steps for cleaning the exterior and general servicing of the product.

Replacing Cutting Line and Spool

Instructions for replacing the trimmer line and spool.

Checking the Fuel Cap

How to inspect the fuel cap for issues affecting performance.

Cleaning Air Filter and Spark Arrester

Procedures for cleaning the air filter and spark arrester.

Replacing the Spark Plug

Steps for replacing the spark plug for optimal engine performance.

Product Storage and Transport

Guidance on storing the product long-term and transporting it safely.

Troubleshooting

Warranty

Limited Warranty Terms

Details the duration and conditions of the product's limited warranty.

Obtaining Warranty Service

Explains the process for getting the product serviced under warranty.

Emission Control Warranty

Emission Control Warranty Statement

Outlines the warranty for emissions-related parts and owner responsibilities.

Related product manuals