EasyManua.ls Logo

Toro 51934 - User Manual

Toro 51934
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Form No. 3329-634
TrimmedBrushcutter
Model No. 51930--230000001 & Up
Model No. 51932-230000001 & Up
Model No. 51934--230000001 & Up
Model No. 51930A--230000001 & Up
Model No. 51932A--230000001 & Up
Model No. 51934A--230000001 & Up
Model No. 51936--230000001 & Up
Model No. 51938--230000001 & Up
Model No. 51940--230000001 & Up
Operator's Manual
........................!
English (E.N), Fre*lch (F), and Spanish (ES)

Table of Contents

Questions and Answers:

Toro 51934 Specifications

General IconGeneral
Engine Type2-Cycle
Cutting Width18 inches
Weight10 lbs
Fuel Capacity16.9 oz
Power SourceGasoline
Line Diameter0.095 inches
Shaft TypeStraight

Summary

Toro Trimmer Brushcutter Overview

Operators Manual

Manual for operating and maintaining the Toro Trimmer/Brushcutter.

Important Information Before Operation

Fueling Instructions

Safe procedures for fueling the trimmer/brushcutter with gasoline.

Starting Procedures

Guidance on cold and warm engine starting for the trimmer/brushcutter.

Flooded Engine Troubleshooting

Steps to resolve an engine flooding issue on the trimmer/brushcutter.

Introduction to the Toro Product

Product Identification

Space to record Model and Serial numbers for product identification.

Understanding Safety Signal Words

Explanation of hazard signal words like DANGER, WARNING, CAUTION, Important, and Note.

Comprehensive Safety Rules

Operator Safety Guidelines

Covers operator physical condition, clothing, and required protective accessories.

Pre-Operation Product Checks

Ensures the trimmer and brushcutter are in safe working condition before use.

Operational Hazard Avoidance

Covers stance, exhaust, fueling, work area, environment, control, and stopping hazards.

Correct Product & Equipment Usage

Guidelines on using the right product for the intended purpose and correct equipment.

Understanding Safety Symbols

Safety Alerts and Warnings

Interprets symbols for safety alerts, thrown objects, bystander safety, and blade thrust.

Operational and Fueling Symbols

Explains symbols related to blade use, manual reading, eye/ear protection, and fuel/oil.

Product Specifications

Technical Details

Provides specifications for engine, durability, cutting width, line size, and weight.

Product Applications

Recommended Uses

Lists the intended applications for the trimmer and brushcutter models.

Product Features

Common Features

Details general features like engine, dual line, grass deflector, and ergonomic design.

Brushcutter Specific Features

Highlights features specific to brushcutters: blade, guard, strap, and barrier bar.

Unpacking the Product

Unpacking Instructions

Steps for carefully removing and inspecting the product from its packaging.

Packing List Verification

List of included parts to verify against the product contents.

Product Assembly Guide

Connecting Shaft Attachments

Instructions for connecting and removing the attachment to the upper shaft.

Attaching Front Handle

Procedure for attaching the front handle to the trimmer/brushcutter assembly.

Attaching Shoulder Strap

Steps to attach the shoulder strap for enhanced user support.

Attaching Grass Deflector

Curved Shaft Deflector Attachment

Procedure for attaching the grass deflector to curved shaft models.

Straight Shaft Deflector Attachment

Procedure for attaching the grass deflector to straight shaft models.

Converting Brushcutter to Trimmer

Removing Blade and Guard

Steps to remove the blade and brushcutter guard for conversion.

Attaching Grass Deflector for Trimmer

Procedure to attach the grass deflector during conversion.

Installing Trimmer Head Assembly

Steps to install the trimmer head assembly after conversion.

Converting Trimmer to Brushcutter

Removing Trimmer Head and Deflector

Steps to remove trimmer head assembly and grass deflector for conversion.

Attaching Brushcutter Guard

Procedure to attach the brushcutter guard for conversion.

Installing Brushcutter Blade

Steps to install the blade for brushcutter operation.

Product Operation

Mixing Fuel Correctly

Instructions for safely mixing gasoline and 2-cycle oil for the engine.

Filling the Fuel Tank

Safe procedures for filling the fuel tank, including warnings.

Starting and Stopping the Product

Cold Engine Starting Procedure

Step-by-step guide to start a cold engine on the trimmer/brushcutter.

Warm Engine Starting Procedure

Step-by-step guide to start a warm engine on the trimmer/brushcutter.

Stopping the Product Safely

Instructions on how to properly stop the trimmer/brushcutter.

Operating the Trimmer

Curved Shaft Trimmer Operation

How to operate the curved shaft trimmer model.

Advancing the Cutting Line

Technique for advancing the cutting line using the retaining cap.

Straight Shaft Trimmer Operation

How to operate the straight shaft trimmer model.

Operating the Brushcutter

Product Maintenance

Emissions Maintenance Schedule

Schedule for maintaining emission control parts like air filter and spark arrester.

Cleaning the Product

Instructions for cleaning the exterior of the trimmer/brushcutter.

Servicing the Product

General servicing advice, including checking fasteners and replacing parts.

Replacing the Cutting Line

Step-by-step guide on how to replace the trimmer line.

Replacing the Spool

Checking the Fuel Cap

Cleaning the Air Filter

Procedure for cleaning the air filter as part of maintenance.

Cleaning the Spark Arrester

Instructions for cleaning the spark arrester screen.

Replacing the Spark Plug

Storing the Product

Guidelines for storing the product for short and long term periods.

To Store the Product Short Term

Steps for storing the product for a brief period.

To Store the Product Long Term

Steps for storing the product for extended periods.

Troubleshooting Common Issues

Engine Will Not Start

Diagnoses and solutions for an engine that fails to start.

Engine Performance Issues

Troubleshooting for low speed and excessive smoke from the engine.

Line Advancement Problems

Solutions for line not advancing or retaining cap difficulty.

Trimmer Head and Oil Issues

Troubleshooting for grass wrapping and oil drips from the muffler.

Product Warranty Information

Limited Warranty Details

Details of the limited warranty for Toro Gas Trimmer Products.

Obtaining Warranty Service

Instructions on how to get warranty service for the product.

Warranty Exclusions and Limitations

Covers design changes, implied warranties, and consequential damages.

Emission Control Warranty Statement

Emission Control System Warranty

Warranty coverage for the nonroad engine's emission control system.

Owner Responsibilities and Maintenance

Owner's duties regarding maintenance and warranty coverage.

Emission Warranty Limitations

Specifies limitations on the emission control system warranty.

Customer Service Information

Contact and Location Information

Provides contact details and address for customer service and authorized dealers.

Related product manuals