Operation
24
Positioning the Seat
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1. Raise the seat and loosen the lock nuts (Fig. 13).
2. Slide the seat to the desired position and tighten
the lock nuts.
1
Figure 13
1. Lock nuts
Recycler
Mowing Tips
Recycler Rider Features
Your Toro Recycler rider has a new and completely
different cutting concept. It leaves your lawn with a
bagged look without bagging clippings.The rider is
equipped with special parts (Fig. 14) which increase
your rider’s ability to cut and recut grass clippings,
leaves, and other yard debris into tiny particles which
are injected down into the grass. These parts are:
• Deck ring
• Special blade and blade stiffener
• Discharge cover
• Four special “kickers” strategically positioned on
the underside of the mower deck. A fifth kicker
is molded into the discharge cover.
394
1
3
3
3
2
4
5
6
Figure 14
1. Deck ring
2. Discharge cover
3. Kickers
4. Blade
5. Blade stiffener
6. Grass deflector
To Next Page
Loading...
