Troubleshooting
35
PROBLEM CORRECTIVE ACTIONPOSSIBLE CAUSES
Engine over heats.
1. Engine load is excessive. 1. Reduce ground speed.
2. Oil level in crankcase is low. 2. Add oil to crankcase.
3. Cooling fins and air passages
under engine blower housing
are plugged.
3. Remove obstruction from
cooling fins and air passages.
Machine does not drive.
1. Drive control is in “PUSH”
position.
1. Move drive control to
“OPERATE” position.
2. Traction belt is worn, loose or
broken.
2. Contact Authorized Service
Dealer.
3. Traction belt is off pulley. 3. Contact Authorized Service
Dealer.
To Next Page
Loading...
