Need help?Do you have a question about the Toro 72108 and is the answer not in the manual?
General| Brand | Toro |
|---|---|
| Model | 72108 |
| Category | Lawn tractor |
| Language | English |
Location and importance of model and serial number plates for product identification and service.
Explanation of DANGER, WARNING, and CAUTION signal words used in the manual for hazard identification.
Safety instructions from ANSI standard B71.1-1998 for safe operation of the equipment.
General safety guidelines for operating the machine, including reading the manual and ensuring a clear area.
Guidelines and precautions for operating the tractor on slopes to prevent loss of control and tip-over accidents.
Safety precautions regarding children's presence near the mowing area and their interaction with the machine.
Safety precautions related to handling gasoline, fueling, and general maintenance.
Warning about the dangers of carbon monoxide from engine exhaust and how to avoid it.
Specific safety rules for riding mowers, including turning, unattended operation, and maintenance.
Guidance on the type of unleaded regular gasoline to use and important notes about fuel additives.
Warnings about the flammability and explosiveness of gasoline and how to avoid fires.
Benefits and usage of fuel stabilizer/conditioner for maintaining gasoline freshness and engine performance.
Step-by-step instructions for safely filling the fuel tank, including precautions and fuel level guidance.
Instructions for checking the engine oil level before operation, referring to a later page for details.
Introduction to the machine's controls and identification of key components shown in Figure 1.
Explanation of the Key Choice switch used to deactivate the "Operating-In-Reverse" interlock feature.
Instructions on setting and releasing the parking brake, and its indicator light function.
Procedure for releasing the parking brake by pushing the brake pedal.
Step-by-step guide to start the engine, including choke and PTO settings.
Procedures for stopping the engine and machine, including parking brake and ignition key actions.
Steps to engage the Power Take Off (PTO) by depressing the brake and pulling the PTO switch.
Steps to disengage the Power Take Off (PTO) by depressing the brake and pushing the PTO switch.
Explanation of the safety interlock system's design to prevent starting or operation under unsafe conditions.
How the PTO interlock prevents operation in reverse and how to temporarily deactivate it.
Explanation of the lights on the indicator control module, including PTO, Hourmeter, Battery, Fuel Level, Oil, and Operating-in-Reverse.
Information on the engine temperature light and the procedure for engine overheating.
How to control forward and backward movement using the throttle and traction control pedal.
Procedure for safely stopping the machine, including engaging the parking brake.
Steps to raise and lower mower attachments using the lift switch.
How to adjust the Dial-A-Height knob to set the stop location for attachment travel.
Instructions for adjusting the tractor seat for optimal operator comfort and control.
How to turn on and off the headlights using the ignition switch and battery considerations.
Steps to adjust the steering wheel tilt for best operator control and comfort.
Steps to engage and disengage cruise control to maintain a set ground speed.
Steps to prepare the machine for pushing by hand, including disengaging PTO and stopping the engine.
How to switch the drive control rod between "PUSH" and "OPERATE" modes.
A comprehensive chart detailing maintenance tasks and their recommended service intervals based on usage hours and time.
Specifies cleaning/replacement intervals for foam and paper air cleaner elements based on usage.
Step-by-step instructions for removing the foam and paper air cleaner elements.
Procedures for cleaning the foam element (washing, drying, oiling) and paper element.
Specifies when to change engine oil and details about oil type and capacity.
Procedure for checking the engine oil level using the dipstick, with important overfill warnings.
Step-by-step guide for draining old engine oil and refilling with new oil.
Specifies when to replace the oil filter and outlines the replacement procedure.
Details recommended intervals for checking spark plugs and specifications for type and gap.
Procedures for removing, checking the condition, and checking the gap of spark plugs.
Steps for correctly installing spark plugs, including tightening torque.
Details how often to grease and the step-by-step procedure for lubricating the machine.
Identifies specific points on the machine requiring grease, such as front wheels and pedals.
Specifies the recommended tire pressure and how often to check it.
Steps to verify the proper operation of the brake system, ensuring it locks and skids.
Procedure for adjusting the brake mechanism to ensure proper engagement and clearance.
Specifies when to replace the fuel filter and outlines the replacement procedure.
Instructions for checking the power lift fluid level and adding fluid if necessary.
Details recommended checks for toe-in and how to measure it for alignment.
Procedure for adjusting the toe-in to correct steering alignment issues.
Notes that the transaxle is sealed and does not require fluid checking or changing.
Identifies fuse types and ratings and explains how to replace blown fuses.
Step-by-step instructions for removing a headlight bulb from its holder.
Details checking electrolyte level, cleaning, charging, and battery specifications.
Step-by-step instructions for safely disconnecting and removing the battery.
Steps for safely installing and connecting the battery after maintenance.
Procedure for adding distilled water to battery cells, emphasizing timing and avoiding overfilling.
Instructions on how to check the electrolyte level in battery cells to ensure it's within the correct range.
Instructions for cleaning the machine's exterior, engine, and control panel before storage.
Steps for preparing the machine for storage longer than 30 days, including fuel stabilization and battery care.
Identifies causes and corrective actions for when the engine starter does not engage.
Addresses issues with the engine failing to start or running erratically, providing solutions.
Outlines reasons for reduced engine power and how to resolve them.
Lists causes and corrections for the engine overheating.
Identifies causes and corrective actions for unexpected vibrations during operation.
Provides solutions for issues where the machine fails to move or drive.
Outlines what the Toro warranty covers, exclusions, and legal disclaimers.
Explains the owner's responsibility for routine maintenance to keep the warranty effective.
Provides instructions on how to get warranty service and contact information for support.
To Next Page
