To Next PageTo Next Page
Need help?Do you have a question about the Toro 72047 and is the answer not in the manual?
General| Horsepower | 22 hp |
|---|---|
| Number of Blades | 2 |
| Cutting Height Range | 1.5-4.5 inches |
| Transmission | Hydrostatic |
| Turning Radius | 18 inches |
| Warranty | 3 years limited |
| Engine Displacement | 724cc |
Location and importance of model and serial number identification plates for service.
Explanation of DANGER, WARNING, CAUTION signal words and their hazard levels.
Essential practices for safe tractor operation, hazard avoidance, and operator responsibility.
Critical guidelines for operating safely on slopes to prevent loss of control and tip-overs.
Procedures to ensure the safety of children around the operating area.
Safety measures for performing maintenance, handling fuel, and working with the battery.
Identification and importance of safety decals placed on the tractor.
Specifies correct gasoline type and safe refueling procedures to prevent fire hazards.
Guidance on using fuel additives for storage and maintaining fuel system integrity.
Instructions for checking oil level, specifying oil type, viscosity, and change intervals.
Identification and function of steering wheel, ignition, brake, throttle, PTO, and other controls.
Step-by-step instructions for setting and releasing the parking brake.
Comprehensive guide for safely starting, operating, and shutting down the engine.
Procedures for engaging and disengaging the PTO to operate attachments.
Explanation of safety interlocks, including reverse operation and seat presence.
Instructions on controlling tractor movement, speed selection, and steering.
Guidance on choosing appropriate gears for different operating conditions.
How to operate the attachment lift lever and adjust implement height with Dial-A-Height.
Instructions for adjusting the seat and tilt steering wheel for comfort and control.
How to turn on and use the tractor's headlights.
A summary table of recommended maintenance tasks and their frequencies.
Procedures for cleaning, replacing, and maintaining the air cleaner for engine health.
Detailed steps for checking oil, changing oil, and replacing the oil filter.
Instructions on how to drain and refill the engine oil.
Procedure for replacing the engine oil filter.
Guidance on checking, gapping, and replacing spark plugs for optimal engine performance.
Identification of lubrication points and instructions for greasing the chassis and components.
Specifications for tire pressure and frequency of checks.
Steps to check brake function and adjust for proper stopping power.
Procedure for safely draining the fuel tank, often for maintenance or storage.
Instructions on how to replace the fuel filter to ensure clean fuel delivery.
Method for measuring and adjusting front wheel alignment for steering stability.
Details on fuse types, locations, and how to replace them.
Steps for removing and installing headlight bulbs.
Procedures for checking electrolyte, cleaning terminals, and charging the battery.
Schematic illustrating the tractor's electrical components and their interconnections.
Solutions for common problems preventing the engine from starting or cranking.
Troubleshooting steps for engine issues like power loss, overheating, or vibration.
Diagnostic and corrective actions for problems with machine movement or transmission.
Details on what parts and labor are covered by the manufacturer's warranty.
Information on how to obtain warranty service and common exclusions.
