Maintenance
32
Fuse
Service Interval/Specification
The electrical system is protected by fuses. It requires
no maintenance, however, if a fuse blows check
component/circuit for malfunction or short. To
replace fuses pull up on the fuse (Fig. 32) to remove
or replace it.
Fuse: Main/Starter F1–30 amp, blade-type
Alternator F2–25 amp, blade-type
Dash/Hour meter F3–10 amp, blade-type
Head lights F4–10 amp, blade-type
2344
1
2
3
4
Figure 32
1. Main-30 amp
2. Alternator-25 amp
3. Dash/Hour meter-10 Amp
4. Head lights-10 amp
To Next Page
Loading...
