Maintenance
35
Fuse
Service Interval/Specification
The electrical system is protected by fuses. It requires
no maintenance, however, if a fuse blows check
component/circuit for malfunction or short. To
replace fuses pull up on the fuse (Fig. 39) to remove
or replace it.
Fuse: Main F1–30 amp, blade-type
Alternator F2–25 amp, blade-type
Safety system F3–10 amp, blade-type
Lights F4–10 amp, blade-type
m–3387
1
2
3
4
Figure 39
1. Main-30
amp
2.
Alternator-25 amp
3.
Safety system-10 amp
4.
Lights-10 amp
To Next Page
Loading...
