Operation
22
Positioning
the Seat
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1. To adjust, move the lever sideways to unlock
seat (Fig. 21).
2. Slide the seat to the desired position and release
the lever to lock the seat into position.
IMPORTANT: Be sure that the seat is locked
in position before operating.
1
Figure 21
1. Adjustment
lever
Headlights
The headlights are turned on by turning the ignition
key to the LIGHTS position. They can be turned on
even if the engine is not running. Remove the
ignition key when leaving the machine unattended so
that the headlights cannot be turned on and discharge
the battery.
m–3312
1
Figure 22
1. Lights
Positioning
the T
ilt Steering
Wheel
The steering wheel has four tilt locations. Position the
steering wheel where you have the best control of the
machine and are most comfortable.
1. Lift the tilt lever to release the lock (Fig. 23).
2. Move the steering wheel to a comfortable
position; then release the lever to lock it in place.
1
2
m–3259
Figure 23
1. Tilt
lever
2.
Steering wheel
To Next Page
Loading...
