Troubleshooting
48
Abnormal vibration or noise.
1.
The engine mounting bolts
are loose.
1. T
ighten the engine mounting
bolts.
2.
The idler pulley or cutter deck
blade is loose.
2. T
ighten the appropriate
pulley.
3.
The transaxle cooling fan is
loose.
3.
Contact your Authorized
Service Dealer
.
4.
There is a problem with the
electric clutch
4.
Contact your Authorized
Service Dealer
.
PT
O (cutter deck) belt comes of
f
of pulleys, slips, or fails.
1.
Belt tension is incorrect.
2.
Mower level is incorrect
3.
Blade slope in transport is
incorrect.
4.
Cutter deck belt guide is
loose or incorrectly adjusted.
5.
Belt is worn or damaged.
6.
Pulley is damaged.
7.
Engine is not at full throttle.
8. PT
O is being engaged when
cutter deck is in tall uncut
grass or weeds.
9.
Cutter deck is overloaded
because mulching or bagging
requires more power
.
10.
Cutter deck is overloaded
because too much grass is
being cut at a time.
11.
Cutter deck is overloaded
because deck is clogged with
grass clippings.
12.
Cutter deck is overloaded
because tractor is mowing too
fast for conditions.
1.
See cutter deck or
attachment manual.
2.
See cutter deck manual.
3.
See cutter deck manual.
4.
Adjust and tighten belt guide.
5.
See cutter deck or
attachment manual.
6.
Contact authorized dealer
.
7.
Always operate engine
powered attachments at full
throttle.
8.
Engage PT
O only in shorter
or previously cut grass.
9.
Reduce ground speed when
mulching or bagging.
10.
Cut tall grass and weeds with
mower in its highest position,
making a second pass cutting
at height desired.
11.
Clean cutter deck.
12.
Reduce ground speed.
To Next Page
Loading...
